Windows 7용에서 끝난 버전이라 Xilinx사에서는 Windows 10용 VirtualBox Linux용으론 나오는데 가상머신을 올려야 하기도 하고 Hyper-V도 쓰면 여러개 있는것도 안좋고 리눅스도 상대적으로 불편한데 그렇다고 Windows XP를 설치할수도 없어서 찾아보다가 찾음
Note: I am assuming you are using ISE 14.7 and have installed it to the default location
Open the following directory: C:\Xilinx\14.7\ISE_DS\ISE\lib\nt64 Find and rename libPortability.dll to libPortability.dll.orig Make a copy of libPortabilityNOSH.dll (copy and paste it to the same directory) and rename it libPortability.dll Copy libPortabilityNOSH.dll again, but this time navigate to C:\Xilinx\14.7\ISE_DS\common\lib\nt64 and paste it there In C:\Xilinx\14.7\ISE_DS\common\lib\nt64 Find and rename libPortability.dll to libPortability.dll.orig Rename libPortabilityNOSH.dll to libPortability.dll
Fixing PlanAhead not opening from 64-bit Project Navigator
PlanAhead will not open when you are running 64-bit Project Navigator (e.g. for I/O Pin Planning), it just displays the splash screen but never opens.
To fix it, we have to force PlanAhead to always run in 32-bit mode.
Open C:\Xilinx\14.7\ISE_DS\PlanAhead\bin and rename rdiArgs.bat to rdiArgs.bat.orig Download the attached zip file Extract it. You should now have a file named rdiArgs.bat Copy the new rdiArgs.bat file to C:\Xilinx\14.7\ISE_DS\PlanAhead\bin
참고 사이트 https://www.eevblog.com/forum/fpga/guide-getting-xilinx-ise-to-work-with-windows-8-64-bit/ 첨부파일은 이터넷에 돌아다니는 lic 파일과 PlanAhead 64bit 실행용 rdiArgs.bat 파일
